Spherical AlSi10Mg Aluminum Alloy Powder
CAS —
AlSi10Mg · 3.2382
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 0–25 μm (15–53 μm on request) | Laser diffraction |
| PSD, typical (D10/D50/D90) | 5 / 12 / 22 μm | Laser diffraction |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Aluminum (Al) | Balance | ICP-OES / LECO |
| Silicon (Si) | 9–11% | ICP-OES / LECO |
| Magnesium (Mg) | 0.2–0.45% | ICP-OES / LECO |
| Iron (Fe) | ≤ 0.25% | ICP-OES / LECO |
Typical Applications
- LPBF/SLM lightweight structures
- Automotive & drone brackets
- Heat exchangers & housings
- Aerospace secondary structures
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).