Spherical CuSn10 Bronze Powder
CAS —
CuSn10
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 15–53 μm (other cuts on request) | Laser diffraction |
| PSD, typical (D10/D50/D90) | 15 / 31 / 56 μm | Laser diffraction |
| Flowability (Hall), typical | ≈ 15 s/50 g | ASTM B213 / GB-T 1482 |
| Apparent / Tap Density, typical | 5.1 / 5.5 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Copper (Cu) | Balance | ICP-OES / LECO |
| Tin (Sn) | 9–11% | ICP-OES / LECO |
| Oxygen (O) | ≤ 0.30% | ICP-OES / LECO |
Typical Applications
- Self-lubricating bearings (sintered)
- LPBF marine & art components
- Diamond-tool bond matrix
- Friction materials
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).