Spherical GH3536 Powder (Hastelloy X Equivalent)
CAS —
GH3536 · 2.4665 type
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 53–106 μm (15–53 μm on request) | Laser diffraction |
| Oxygen (O), typical | ≈ 220 ppm | Inert gas fusion (LECO) |
| Nitrogen (N), typical | ≈ 40 ppm | Inert gas fusion (LECO) |
| Flowability (Hall), typical | ≈ 16 s/50 g | ASTM B213 / GB-T 1482 |
| Apparent / Tap Density, typical | 4.4 / 5.2 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Nickel (Ni) | Balance | ICP-OES / LECO |
| Chromium (Cr) | 20.5–23% | ICP-OES / LECO |
| Iron (Fe) | 17–20% | ICP-OES / LECO |
| Molybdenum (Mo) | 8–10% | ICP-OES / LECO |
| Cobalt (Co) | 0.5–2.5% | ICP-OES / LECO |
| Tungsten (W) | 0.2–1.0% | ICP-OES / LECO |
Typical Applications
- Directed Energy Deposition (DED)
- Gas-turbine combustor & afterburner parts
- Industrial furnace components
- High-temperature oxidation-resistant repair
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).