Spherical Inconel 625 Superalloy Powder
CAS —
IN625 · 2.4856
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 15–53 μm (other cuts on request) | Laser diffraction |
| PSD, typical (D10/D50/D90) | 20 / 37 / 58 μm | Laser diffraction |
| Oxygen (O), typical | ≈ 180 ppm | Inert gas fusion (LECO) |
| Nitrogen (N), typical | ≈ 100 ppm | Inert gas fusion (LECO) |
| Flowability (Hall), typical | ≈ 14 s/50 g | ASTM B213 / GB-T 1482 |
| Apparent / Tap Density, typical | 4.1 / 5.2 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Nickel (Ni) | Balance | ICP-OES / LECO |
| Chromium (Cr) | 20–23% | ICP-OES / LECO |
| Molybdenum (Mo) | 8–10% | ICP-OES / LECO |
| Niobium (Nb) | 3.15–4.15% | ICP-OES / LECO |
| Iron (Fe) | ≤ 5% | ICP-OES / LECO |
Typical Applications
- LPBF/SLM & DED
- Marine & chemical-processing components
- Aerospace exhaust & ducting
- Oil & gas downhole parts
- Corrosion-resistant overlay cladding
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).