Spherical Ni80Cr20 Alloy Powder (NiCr 80/20)
CAS —
Ni80Cr20
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 15–53 μm / 10–30 μm | Laser diffraction |
| Oxygen (O), typical | ≈ 0.10% | Inert gas fusion (LECO) |
| Flowability (Hall), typical | ≈ 15 s/50 g | ASTM B213 / GB-T 1482 |
| Apparent Density, typical | 4.5 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Nickel (Ni) | Balance | ICP-OES / LECO |
| Chromium (Cr) | 18–21% | ICP-OES / LECO |
| Silicon (Si) | ≤ 1.5% | ICP-OES / LECO |
| Iron (Fe) | ≤ 1.0% | ICP-OES / LECO |
Typical Applications
- Thermal-spray bond coats
- Heating-element & resistor applications
- Hardfacing matrix powder
- Oxidation-resistant coatings
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).