Spherical 304L Stainless Steel Powder
CAS —
304L · 1.4306
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 15–53 μm (other cuts on request) | Laser diffraction |
| PSD, typical (D10/D50/D90) | 19 / 35 / 57 μm | Laser diffraction |
| Oxygen (O), typical | ≈ 500 ppm | Inert gas fusion (LECO) |
| Flowability (Hall), typical | ≈ 15 s/50 g | ASTM B213 / GB-T 1482 |
| Apparent / Tap Density, typical | 4.3 / 4.7 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Iron (Fe) | Balance | ICP-OES / LECO |
| Chromium (Cr) | 18–20% | ICP-OES / LECO |
| Nickel (Ni) | 8–12% | ICP-OES / LECO |
| Carbon (C) | ≤ 0.03% | ICP-OES / LECO |
Typical Applications
- LPBF/SLM & Binder Jetting
- MIM structural parts
- General corrosion-resistant parts
- Architectural & consumer hardware
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).