Spherical CP-Ti Grade 1 Powder (TA1)
CAS 7440-32-6
Ti ≥ 99.5%
AM / 3D-Printing Powder
Powder Characteristics
| Property | Value | Test Method |
|---|
| Particle Size Cut | 15–53 μm (other cuts on request) | Laser diffraction |
| PSD, typical (D10/D50/D90) | 20 / 34 / 53 μm | Laser diffraction |
| Oxygen (O), typical | ≈ 0.08% | Inert gas fusion (LECO) |
| Apparent / Tap Density, typical | 2.5 / 2.9 g/cm³ | ASTM B212 / GB-T 1479.1 |
Typical values per manufacturer COA; lot values may vary. Lot-specific COA & PSD report supplied with each shipment.
Chemical Composition (Specification)
| Element / Component | Specification | Test Method |
|---|
| Titanium (Ti) | Balance (≥ 99.5%) | ICP-OES / LECO |
| Oxygen (O) | ≤ 0.18% | ICP-OES / LECO |
| Iron (Fe) | ≤ 0.20% | ICP-OES / LECO |
| Nitrogen (N) | ≤ 0.03% | ICP-OES / LECO |
| Hydrogen (H) | ≤ 0.015% | ICP-OES / LECO |
Typical Applications
- Chemical-processing equipment parts
- Biomedical & dental development
- LPBF corrosion-resistant parts
- Cold spray & MIM feedstock
Packaging
Vacuum-sealed argon-filled containers; quantity per inquiry
Storage & Shelf Life
Sealed, dry, inert atmosphere recommended. Avoid moisture.
All values are typical and may vary by lot. This TDS does not constitute a warranty.
Contact TKNCO for lot-specific Certificate of Analysis (COA).